Plastering in Guildford & Surrey

Clean, smooth plasterwork for new builds, renovations, and repairs.

About This Service

Good plastering is the foundation of a quality interior finish. We carry out sand-and-cement render, dot-and-dab dry lining, full plaster, and skim coats across new builds, extensions, and refurbishments throughout Surrey. Our plasterers produce consistently smooth, flat surfaces ready for decoration.

What's Included

Interior room with fresh plaster around new black-framed sliding glass doors overlooking a garden patio

Frequently Asked Questions

Common questions about plastering in Surrey.

Skimming applies a thin 2–3 mm coat of finish plaster over an existing surface. It is ideal when the base is sound and just needs smoothing. Full plastering involves applying a backing coat (bonding or hardwall) followed by a finish skim, used on bare blockwork, brick, or new partitions.

In many cases yes. If the existing plaster is solid and well bonded, we can apply a skim coat directly over it. If the old plaster is blown, cracked, or damp, we will advise stripping it back first to ensure the new finish doesn’t fail.

New plaster needs to dry fully before painting, typically 4–6 weeks for full plaster, or 1–2 weeks for a skim coat in a well-ventilated room. We recommend a diluted ‘mist coat’ of emulsion as the first coat to allow moisture to continue escaping.

Yes, we remove artex and skim ceilings to a smooth finish. Older artex (pre-1980s) may contain low levels of chrysotile asbestos, so we always carry out a test before starting. If asbestos is present, we arrange safe removal by a licensed contractor before replastering.

We take on both. Patch repairs after pipe work, electrics, or structural alterations are a regular part of our work. We will feather the repair to blend as well as possible with the surrounding surface.

Interested in Plastering?

Tell us about your project and we will get back to you with a free, no-obligation quote.

Scroll to Top